The PGM10N and PGM10F are solid state relays with zero-cross functions for single phase power.
They are used to control heating in conjunction with time proportioning voltage pulse output controllers.

Catalog (PDF/87KB)

Specification Sheet (PDF/197KB)

The PGU410 Power Gate Unit (thyristor-type power regulator) is a phase-controlled power regulator controlled by a 4 to 20mA control signal or a manual setting device (QN740A101).

Catalog (PDF/77KB)

User's Manual (PDF/242KB)

The ECM3000 is a control motor designed to control various equipment in industrial applications. Two kinds of models are available: one has a 90° angular stroke motor for burner control and the other has a 160° angular stroke motor for valve control of hot and cold water and steam.

Catalog (PDF/63KB)

Specification Sheet (PDF/273KB)

User's Manual (PDF/737KB)

The RN748A is a signal converter that receives a 4–20mA input signal from a controller and outputs a relay contact signal to drive a control motor with a built-in 135Ω feedback potentiometer for position proportioning operation. By setting the center of rotation angle and the proportional band, a split operation can be performed.

Catalog (PDF/159KB)

User's Manual (PDF/278KB)

The MY940 is a motorized actuator with a high level of output for use with control valves in various facilities including air-conditioning systems. In combination with the V5063A single-seated two-way valve, the V5064A double-seated two-way valve, and the V5065A mixing three-way valve, they are suitable for controlling large-bore fluid control systems or versions where a high differential pressure is generated during shutoff. The actuators have high/low limit mechanisms and feedback potentiometers (nominally 135 ohms). Yoke set (QMY9400) separately available.

Catalog (PDF/66KB)

The HM serves as an electric actuator to execute either 2-position or proportional control action, with relay contact signal input.
The housing is aluminum alloy casting making it rigid, compact and dripproof. Internal moving parts are sealed with grease for high efficiency, low running noise and long life.

Catalog (PDF/56KB)

The VEN4000B is used for ON/OFF or safety shutoff control of a gas burner, for city gas, natural gas or LP gas. It is available with flow rate and quick-opening speed adjustment.
Noiseless operation is achieved by employing a DC-energized solenoid with a built-in rectifier.

Catalog (PDF/50KB)

User's Manual (PDF/414KB)

The VEN4000C is used for ON/OFF or safety shutoff control of a gas burner, for city gas, natural gas or LP gas. It is available with flow rate, step pressure and slow-opening speed adjustments.
Noiseless operation is reached by employing a DC-energized solenoid with a built-in rectifier.

Catalog (PDF/48KB)

User's Manual (PDF/414KB)

The V4055A/V5055A is used for emergency shut-off or ON/OFF control of city gas, LPG or natural gas. The valve opens slowly to ignite gas burners safely and reliably.
An auxiliary switch can be installed on this fluid power gas unit, which consists of the V4055A valve actuator and the V5055A gas valve.

Catalog (PDF/54KB)

The CCM21/CCV20 is an integral actuator / electrically driven butterfly valve incorporated with a combustion control motor and valve. The motor uses relay contact input for position proportioning or on-off positioning.
The valve can control the flow of air, city gas, natural gas or LP gas. Since the motor and the valve are directly connected, no linkage adjustment is required.

Catalog (PDF/95KB)

The CV3000 Alphaplus range of top-guided, single-seat control valves feature a compact valve body with superior flow control and minimal pressure loss. Alphaplus valves have wide rangeability, accurate flow control and high Cv values, particularly suitable for process control applications where high reliability and tight flow shutoff are essential.

Catalog (PDF/104KB)

The Actival VY5100 is a series of motorized two-way valves with flange connections. The valve and actuator are integrated in a single unit. The valve body can be used for the control of chilled/hot water and steam.
The 4 to 20mAdc and 2 to 10Vdc input methods provide proportional control with a direct digital controller.

Catalog (PDF/75KB)

The VY5302A is a two-way ball valve with threaded connection, and the VY5303A is a three-way ball valve. These valves proportionally control chilled/hot water for HVAC (heating, ventilation, and air conditioning) control. They are used in combination with the MY53X0A actuator.

Catalog (PDF/111KB)

The VY5400 is a motorized three-way valve with flanged connection. The valve and the actuator are integrated in a single unit. The body rating corresponds to JIS 10K. The actuator has a reversible synchronous motor that operates at a low voltage of 24Vac.

Catalog (PDF/106KB)

The VY6100 2-position, 2-way motorized ball valve is designed for chilled/hot water or steam service and features superior shutoff characteristics and reduced pressure loss.
The VY6100A, B are for steam service and the VY6100C, D are for chilled/hot water service.

Catalog (PDF/53KB)

The VY6300 is a two-way ball valve with screw-type connection. The valve provides two-position control of chilled/hot water.

Catalog (PDF/96KB)