The AUR450C is a burner controller with a dynamic self-checking function, and is used in combination with the AUD300C or AUD500C Advanced Ultraviolet Detector.
The AUR450C is a flame safeguard controller that automatically and safely executes ignition sequences and reliably monitors gas and oil burners. The AUR450C includes a 7-segment display and communications function.

Catalog (PDF/86KB)

User's Manual (PDF/6.33MB)

User's Manual for Communications (PDF/945KB)

User's Manual for SLP-A45 Smart Loader Package (PDF/1.30MB)

The AUR350C Advanced UV Relay with Communications is a safe combustion controller with a dynamic self-checking function, and is used in combination with the AUD300C Advanced UV Sensor.
By driving the shutter of the AUD300C, the AUR300C checks itself and the AUD300C for faulty operation while controlling the flame relay.
If a fault occurs in the flame detection circuit of the AUD300C or AUR350C, the AUR350C turns OFF the flame relay to ensure operational safety. Since the AUR350C tracks data on flame voltage, shutter on-off cycles, etc., flame voltage trends can be viewed on a PC monitor.

Catalog (PDF/71KB)

Specification Sheet (PDF/171KB)

User's Manual (PDF/606KB)

User's Manual for SLP-A35 Smart Loader Package (PDF/1.27MB)

The AUR300C is a relay with a dynamic self-checking function, and is used in combination with the AUD300C or AUD500C Advanced Ultraviolet Detector. The AUR300C controls its built-in flame relay while constantly driving the shutter of the UV detector to check for any malfunction in itself or in the UV detector. If the detector or amplifier circuit fails for any reason, the relay shuts itself off automatically and secures the safety of the system.

Catalog (PDF/66KB)

Specification Sheet (PDF/153KB)

User's Manual (PDF/401KB)

The FSP series flame simulator, checker and analog flame meter are optimal support tools for maintenance or troubleshooting of a flame safeguard control system. If something abnormal has occurred in the control system, diagnosis of the problem and checking are easily done using the simulated combustion flame and associated FSP devices.

Catalog (PDF/175KB)

User's Manual for FSP300C Flame Simulator (PDF/184KB)

User's Manual for FSP350A Checker for the AUR300C/350C (PDF/148KB)

User's Manual for FSP450A Checker for the AUR400C/450C (PDF/331KB)

User's Manual for FSP136A Analog Flame Meter (PDF/151KB)

The R4715B and R4715C are flame safeguard controls used to provide automatic operation and safety of combustion in small and medium sized gas-fired burners that have a maximum burning capacity of 175kW/h (150,000Kcal/h) or less.
They are constructed from reliable components to ensure that combustion equipment operates in the correct sequence without fail.

Catalog (PDF/46KB)

User's Manual (PDF/880KB)

The R4424C/D/E are flame safeguard controls used to provide automatic operation and safety of combustion in batch-type compact-sized oil-fired burners.
They are used in combination with a AFD100A/B visible light flame detector.

The R4440H is a flame safeguard control used to provide automatic operation in correct sequence and with safe combustion for batch-type small sized oil-fired burners.

Catalog (PDF/57KB)

The R4750B and R4750C are flame safeguard controls used to provide automatic operation and safety of combustion in medium sized gas-fired burners that have a maximum burning capacity of 580kW/h (500,000Kcal/h) or less.
They are constructed from reliable components to ensure that the combustion equipment operates in the correct sequence without fail.

Catalog (PDF/49KB)

User's Manual for R4750B (PDF/495KB)

User's Manual for R4750C (PDF/756KB)

The R4780B/C/D are flame safeguard controls used to provide automatic operation and safety of combustion in oil-fired, gas-fired, or oil-gas fired burners that have a burning capacity of 580kW/h (500,000Kcal/h) or greater.
They are constructed from reliable components to ensure that the combustion equipment operates in the correct sequence without fail.

Catalog (PDF/52KB)

User's Manual (PDF/985KB)

User's Manual (PDF/175KB)

The FRS100 is a flame safeguard control with a self-checking circuit to ensure safe start-up operation. If abnormal conditions exist, ignition start is prevented or system safety is secured by the shutdown of combustion if the main flame fails during operation.
This compact controller is used with a flame rod or a Minipeeper Ultraviolet Flame Detector for batch operation of combustion equipment, and can be mounted on a DIN-specification rail.

Catalog (PDF/133KB)

Specification Sheet (PDF/116KB)

User's Manual (PDF/740KB)

The FRS110 FSG Relay is a flame safeguard control with a burner ignition control function, and can be used for batch operation combustion equipment with the FRS100 Flame Relay having the flame detecting function.
Ignition start is prevented when an abnormal condition exists on the flame relay or the FSG relay at start-up. The FSG relay has the function of safe shutoff of the fuel cut-off valve upon a flame failure signal from the safe start function during start-up or from the FRS100 flame relay during operation.

Catalog (PDF/57KB)

User's Manual (PDF/764KB)

The AUD300C is a flame detector designed to sense the ultraviolet radiation from an oil or gas burner flame. This unit is used in combination with the dedicated AUR400C/450C or AUR300C/350C. Any malfunction that has occurred in the UV detector or UV relay can be detected by the continuous and highly accurate dynamic self-check function of the built-in shutter driven by the relay, ensuring extremely reliable combustion safety control.

Catalog (PDF/80KB)

User's Manual (PDF/1.63MB)

User's Manual for AUD60A2100/2110 Maintenance Kit (PDF/1.67MB)

User's Manual for AUD50A2100 Shutter Unit (PDF/1.48MB)

User's Manual for AUD10C2100 Tube Unit (PDF/960KB)

The AUD500C is an explosion-proof flame detector designed to sense the ultraviolet radiation from an oil or gas burner flame. This unit is used in combination with the dedicated AUR400C/450C or AUR300C/350C. Any malfunction that has occurred in the UV detector or UV relay can be detected by the continuous self-checking function of the built-in shutter driven by the relay, ensuring highly reliable combustion safety control.

Catalog (PDF/130KB)

User's Manual (PDF/1.35MB)

User's Manual for AUD60A2100/2110 Maintenance Kit (PDF/1.67MB)

User's Manual for AUD50A2100 Shutter Unit (PDF/1.48MB)

User's Manual for AUD10C2100 Tube Unit (PDF/960KB)

The C7007A and C7008A are used with a rectification-type Protectorelay as a flame detector for gas-fired pilot burners.

Catalog (PDF/45KB)

The C7035A is a compact flame detector for use with flame safeguard controls (Protectorelays) with ultraviolet amplifiers.
Features include parallel wiring for difficult sighting applications and protection sealing against pressures up to 34.5kPa.

Catalog (PDF/55KB)

User's Manual for 129464NJ UV Tube (PDF/73.8KB)

The C7076A is a solid-state, dynamic, self-checking flame detector for use with flame safeguard primary safety controls requiring adjustable sensitivity ultraviolet flame detection.
It detects ultraviolet radiation from all flames and includes dual sensitivity adjustment.

Catalog (PDF/62KB)

The C7076D is an explosion-proof solid-state dynamic self-checking flame detector for use with appropriate flame safeguard primary safety controls requiring adjustable sensitivity ultraviolet flame detection.

Catalog (PDF/70KB)

User's Manual (PDF/1.18MB)

The ATN110A-1 is an ignition transformer for commercial and industrial burners. With a simple operation of the changeover tap, it can be used with either 100V or 200V primary voltage.

Catalog (PDF/87KB)

The S7200A solid-state spark generator (igniter) is a high performance ignition transformer used to ignite gun-type oil burners and power gas burners in domestic, commercial and industrial applications. The S7200A has high ignition energy, enabling it to ignite burners which conventionally could be lit only with coil-type ignition transformers.

Catalog (PDF/52KB)

The S720A solid-state spark generator (igniter) is a high-performance ignition transformer used to ignite gun-type oil burners and power gas burners in domestic, commercial and industrial applications.

Catalog (PDF/66KB)

User's Manual (PDF/410KB)